| Model (mm) Parameters | SG200W | SG360W | SG450W | SG200 | SG360 | SG450 |
| 1. Maximum turning diameter (mm) | Φ200 | Φ360 | Φ450 | Φ200 | Φ360 | Φ450 |
| 2. Maximum cutting diameter (shaft/disc) (mm) | Φ50/Φ100 | Φ120/Φ200 | Φ150/Φ250 | Φ50/Φ100 | Φ120/Φ200 | Φ150/Φ250 |
| 3. Maximum cutting length (mm) | 200 | 350 | 450 | 200 | 350 | 450 |
| 4. Chuck size (inches) | 5 | 6 | 8 | 5 | 6 | 8 |
| 5. Spindle type | A2-4 | A2-5 | A2-6 | A2-4 | A2-5 | A2-6 |
| 6. By measuring the diameter of the rod (mm) | Φ32 | Φ45 | Φ52 | Φ32 | Φ45 | Φ52 |
| 7. Maximum travel of tailstock (mm) | 200 | 300 | 450 | Standard without tailstock | Standard without tailstock | Standard without tailstock |
| 8. Tail socket travel (mm) | 130 | 130 | 130 | Standard without tailstock | Standard without tailstock | Standard without tailstock |
| 9. Spindle speed (rpm) | 5000 | 4500 | 3500 | 5000 | 4500 | 3500 |
| 10. Fast moving speed (m/min) | 15/18(X/Z) | 15/18(X/Z) | 15/18(X/Z) | 15/18(X/Z) | 15/18(X/Z) | 15/18(X/Z) |
| 11. Maximum travel of X axis (mm) | 120 | 180 | 240 | 450 | 750 | 900 |
| 12. Maximum Z-axis travel (mm) | 250 | 450 | 600 | 250 | 450 | 600 |
| 13. Number of job positions | 8 | 8 | 8 | Row knife | Row knife | Row knife |
| 14. Tool change time s | 0.3 | 0.3 | 0.3 | Row knife | Row knife | Row knife |
| 15. Outer round handle size (mm) | 16×16 | 20×20 | 25×25 | 16×16 | 20×20 | 25×25 |
| 16. Spindle motor power KW (continuous/30min continuous) | 3.7/5.5 | 5.5/7.5 | 7.5/11 | 3.7/5.5 | 5.5/7.5 | 7.5/11 |
| 17. Servo motor torque X/ZNm | 8/8 | 10/10 | 15/15 | 8/8 | 10/10 | 15/15 |
| 18. Machine weight (kg) | 2300 | 2900 | 3500 | 2300 | 2900 | 3500 |
| Guide rail form and screw | linear guide | Sliding rail | HIWIN | THK |
| ● | × | ● | o | |
| spindle | belt connection | NSK bearings | A2-6 spindle | |
| ● | ● | ● | ||
| tailstock | Hydraulic sleeve tailstock | Bring back the rotor shaft tailstock | ||
| ● | o | |||
| Dota | Eight station hydraulic turret | Ten station hydraulic turret | Twelve station hydraulic turret | |
| ● | o | o | ||
| Chuck/oil cylinder/fixture | 8 "Zhongshi Chuck | 8 "Hollow Chuck | 10 inch solid chuck | 10 "hollow chuck |
| ● | o | o | o | |
| CNC system | FANUC 0i-TF | New Generation Taiwan | other | |
| o | ● | o | ||
| Hydraulic components | Yongzhen, Taiwan | Other brands | ||
| ● | o | |||
| Chip conveyor | Chain plate side chip conveyor | Chain plate rear chip conveyor | Magnetic chip removal | Iron chip car |
| ● | × | o | ● | |
| cooling system | Cooling pump and water tank | Electrical cabinet heat exchanger | Electrical cabinet constant temperature air conditioner | |
| ● | ● | o | ||
| other | warning light | Machine lighting fixtures | Anchor bolts and pads | Semi closed loop measurement |
| ● | ● | ● | ● | |
| Tool measuring device | steady rest | Dragging rack | Technical documents | |
| o | o | o | ● |
If you have any suggestions for our products or services, please leave me a message in a timely manner!
Contact us is the way to solve the problem
